Hot Runner Temperature Controllers
Control Modules

Model TC5F
Quick Order# T001
$155 each ($146 each for 13+ modules)

The brain of our hot runner temperature control systems is the state-of-the-art, user-friendly Model TC5F control module.

Features:

• Compatible/interchangeable with others, including DME, Athena, Global Plastic Moulding Supplies and Yudo
• Dual Display temperature control, Present Value and Set Value
• Triple LED allows separate Auxiliary Display to maximize productivity
• Auto / Manual function
• PID auto temperature control
• Dual selectable for thermocouple type (J or K)
• Dual selectable for temperature scale ( Deg C or Deg F)
• Displays six alarm modes
• Dual selectable trigger output modes (Zero Cross or phase Angle)
• Fuse break indicator, distinguishes F1 or F2
• Displays electric current , output percentage, frequency
• Detects and examines for broken, shorted out or worn TC/Heaters
• Detects broken and reversed TC
• TC range K TYPE 0~700 Deg C (0~1200 Deg F) / J TYPE:0~500 Deg C (0~900 Deg F)
• RS485 communication: ASCII and RTU molding
• Soft/Heater Dryout function, selectable for both percent of power and run-time

Specifications:

• Power input: 220Vac±20%
• Power frequency: 50/60Hz
• Power consumption: 7W
• Input impedance: 3MΩ
• Output wattage: 3600W(Max)
• 15A/240Vac(Every module)
• Control accuracy: ±0.25%
• Measurement accuracy: ±0.25%

Click image for
larger view.

1. Determine how many zones of control are required
2. Specify the required number of TC5F modules and/or blank panels
3. Specify the mainframe (should be large enough to hold the specified number of modules/blank panels
4. Specify cable lengths (10’ or 20’), plus connectors required
5. Specify any additional requirements, such as floor stands or transformer kits

ONE YEAR WARRANTY
EMI’s Hot Runner Components are warranted to be free from defects of material and workmanship. They are sold subject to our mutual agreement that the liability of EMI is to replace and/or repair at its factory, provided the equipment is returned, transportation prepaid, within (1) one year of the factory ship date. The purchaser agrees that EMI shall assume no liability for electrical or mechanical misuse or from damage that occurs during return shipments to our factory. Components which wear or which are damaged by misuse are not warranted. These include temperature sensors, contact points, fuses, electromechanical relays and triacs. Any units modified by purchaser are not warranted.Purchaser must obtain authorization for return prior to any shipment to factory or shipment will be refused.