|
|
|
- FA Series
- 2000 Series
- 2600 Series
- 2800 Series
- 2900 Series
 |
FA Series Shut Off Nozzles
Female Shut-Off Nozzle (uses your existing nozzle). Shuts off melt flow at the rear of your existing nozzle to deliver shut-off nozzle benefits to enhance your
machine’s performance.
Max. melt pressure: 18,000 psi
Cross-sectional flow area: .370 sq. in.
We will customize to fit your press.
Pricing |
Dimensions
|
 |
2000 Series Shut Off Nozzles
For smaller machines with shorter injection sled travel.
Minimum overall length: 6X 23\32"
Maximum nozzle tip orifice: 5\16"
Max. melt pressure: 18,000 psi
Cross-sectional flow area: .196 sq. in.
Pricing |
Dimensions
|
 |
2600 Series Shut Off Nozzles
For medium sized machines.
Minimum overall length: 9 1\8"
Maximum nozzle tip orifice: 1\2"
Max. melt pressure: 18,000 psi
Cross-sectional flow area: .370 sq. in.
Pricing |
Dimensions
|
 |
2800 Series Shut Off Nozzles
For larger machines, 1,000 tons and greater or high flow applications.
Minimum overall length: 12 1\2"
Maximum nozzle tip orifice: 5\8"
Max. melt pressure: 18,000 psi
Cross-sectional flow area: .442 sq. in.
Pricing |
Dimensions
|
 |
2900 Series Shut Off Nozzles
For high pressure (to 30,000 psi), high rate molding of thin wall parts, or heavy wall, large parts.
Minimum overall length: 13 7\8"
Maximum nozzle tip orifice: 5\8"
Max. melt pressure: 30,000 psi
Cross-sectional flow area: .442 sq. in
Pricing |
Dimensions
|
|
|
How to Choose the Correct Shut Off Nozzle
Selection of the right Performer nozzle is based on your injection pressure, machine size, flow rate, sled travel
and material. Answers to these questions will help determine nozzle selection.
|
1. What is your plastic melt injection pressure? (Not the hydraulic system pressure) |
|
If under 18,000 psi, any of the Performer series shown can be used. If over 18,000 psi, but less than 30,000 psi,
use the 2900 Series. |
2. What type of material is being processed? |
|
General purpose materials with no fillers can be processed through any Performer. For materials which are corrosive, have additives,
or are shear sensitive, call for more information. |
3. Measure to determine which series nozzle will fit your platen. |
|
Note the overall “A” dimension on the drawings. (The minimum OAL can be reduced further by building a combination one-piece
machine adaptor and end cap). |
|
