|
|
|
|
|
2800 Series Shut-Off Nozzles
|
For larger machines, 1,000 tons and
greater or high flow applications.
Minimum overall length: 12 1/2"
Maximum nozzle tip orifice: 5/8"
Maximum melt pressure: 18,000 psi
Cross-sectional flow area: .442 sq. in.
FA Style
|
|
|
- 2800 Series
- 2800 FA Style
|
When ordering, please specify:
- Make & model of injection machine.
- Adaptor thread length, diameter, & pitch
- Rear opening size
- Nozzle tip radius & orifice
- Thermocouple tapsize (two ¹/8" NPT are standard,one in machine adaptor hex,
one in nozzle extension hex)
- Heater band voltage
- Solenoid voltage
- Material being processed
- Injection shot size
- Injection rate(seconds to fill mold)
- Injection pressure
|
| |
Model# |
| 2800-1 |
2800-3 |
2800-6 |
2800-10 |
| "A" Overall Length |
12 1/2" |
14 3/8" |
18 1/4" |
22 1/4" |
| "B" Projection |
21/32" |
2 1/2" |
6 3/8" |
10 3/8" |
| Shut-Off
Body Assembly |
$2,925.00 |
$2,925.00 |
$2,925.00 |
$2,925.00 |
| Heater Band EMC02T3-?-500 |
74.00 |
74.00 |
74.00 |
74.00 |
| Heater Band EMC614NW3-?-500 |
46.00 |
46.00 |
46.00 |
46.00 |
| Machine Adaptor |
543.00 |
543.00 |
543.00 |
543.00 |
| Heater Band EMD42T3-?-700 |
79.00 |
79.00 |
79.00 |
79.00 |
| Nozzle Tip |
140.00 |
- |
- |
- |
| Nozzle
Extension & Tip |
-
|
710.00 |
746.00 |
819.00 |
| Heater Band EMA212WK3-?-150 |
-
|
41.00 |
-
|
-
|
| Heater Band EMA244WK3-?-500 |
-
|
-
|
54.00 |
-
|
| Heater Band EMA242WK3-?-400 |
-
|
-
|
-
|
2@
62.00 |
| Complete
Package Price: |
$3,807.00 |
$4,418.00 |
$4,485.00 |
$4,610.00 |
? = Specify Heater Band Voltage 1 = 120v / 2 = 230v
(Recommended temperature control)
2 zone, 15 amp/zone mainframe (MF02A) and 2 (TC5F) controllers.
If needed, cables and connectors are sold separately. |
|
How to Choose the Correct Shut Off Nozzle
Selection of the right Performer nozzle is based on your injection pressure, machine size, flow rate, sled travel
and material. Answers to these questions will help determine nozzle selection.
|
1. What is your plastic melt injection pressure? (Not the hydraulic system pressure) |
|
If under 18,000 psi, any of the Performer series shown can be used. If over 18,000 psi, but less than 30,000 psi,
use the 2900 Series. |
2. What type of material is being processed? |
|
General purpose materials with no fillers can be processed through any Performer. For materials which are corrosive, have additives,
or are shear sensitive, call for more information. |
3. Measure to determine which series nozzle will fit your platen. |
|
Note the overall “A” dimension on the drawings. (The minimum OAL can be reduced further by building a combination one-piece
machine adaptor and end cap). |
|
