|
|
|
Nozzle Styles
Nozzle Styles | Nozzle Accessories
| All
EMI’s Nozzles feature better-than-OEM specifications and
perfect finishes—no pits, burrs or rough edges. Each must
pass our 100% Quality Assurance standards. All of our nozzles
are guaranteed for two years. |
- One &
Two Piece
- Big
Bore
- Internally
Heated
- Removeable
Tips
- Tramp Material
Filter Nozzle
- Linear Edge
Filter Nozzle
- Linear Edge
Mixer Nozzle
One-Piece Nozzles
|
Two-Piece Nozzles
|
Big Bore: Two-Piece Nozzles and Tips
Minimizes material stresses and pressure issues.
If you’re
molding large, high-ounce capacity parts, the EMI Big Bores will
give you dramatically improved flow area! Featuring a 3\4" I.D.
bore size versus 1\2" standard units, providing higher throughput.
Pricing |
Dimensions
(Note: nozzle tips sold separately)
|
Internally Heated Nozzles
Ideal solutions when space restrictions prevent the use of heater blinds.
Additional information needed to order.
- Machine thread diameter, length, and rear opening (to find, click on list at left of page)
- Overall nozzle length
- Tip radius and orifice
- Thermocouple location and tap size
- Cartridge heater voltage
|
Removable Nozzle Tips
-
EMI Standard nozzle tips are made of S-5 tool steel which stands up to heat better than S-1, and provide better shock and
impact resistance than H-13.
-
EMI Fast heat transfer tips are made of Amco 940 copper alloy because traditional beryllium copper is extremely toxic to workers
when it is sanded and polished. Be safe, use only EMI’s Amco 940 fast heat transfer tips.
|
|
Standard Tip (S-5 Tool Steel) |
Fast Heat Transfer |
Nylon / Reverse Taper |
Fast Heat Transfer & Nylon / Reverse Taper |
Big Bore Tip |
Extended Standard Tip |
Extended Fast Heat Transfer |
$13.50
(Click on picture for dimensions) |
$35.00 |
$13.50
(Click on picture for dimensions) |
$35.00 |
$43.00 |
$38.00
(Click on picture for dimensions) |
$68.00 |
|
Tramp Material Filter Nozzle
An EMI Original, this proven design is still widely used throughout the industry. Used instead of an ordinary nozzle, EMI Tramp Material Filters
provide great filtration and minimal pressure drop.
Pricing
(Note: nozzle tips sold separately)
|
Linear Edge Filter Nozzle & Cartridge Heaters
Filters foreign particles down to .010". Improves homogenization of the melt. Minimizes downtime.
Materials pass over multiple flutes at the infeed end of the filter element, then pass over the barrier to the discharge flutes. The .010"
clearance above the barrier prevents larger particles or unplasticized pellets from passing through the filter, while improving homogenization
of the melt. Contaminants are held in the infeed side, preventing plugged sub-gates and hot runner tips. Multiple flutes minimize significant
pressure drop. The filter has standard 1 1/2" O.D. nozzle body dimensions, uses standard nozzle tips and heater bands and is easily removed for
cleaning by removing the nozzle tip.
Pricing
(Note: nozzle tips sold separately)
|
Linear Edge Mixer Nozzle & Cartridge Heaters
Mixes dry colors, liquids, & concentrates with minimal pressure drop. Filters larger impurities.
Available for almost any machine make, EMI Linear Edge Mixers are a direct replacement for your existing nozzle. The Mixers have multiple
flutes over which materials must pass, blending materials together three times on their way to the discharge flutes. A .020" clearance above
the barrier minimizes pressure drop and traps foreign particles larger than .020", protecting sub gates and hot runner tips. The Mixer has
standard, 1 1/2" O.D. nozzle body dimensions, uses standard nozzle tips and heater bands and is easily removed for cleaning by removing the nozzle tip.
Pricing
(Note: nozzle tips sold separately)
|
|
|
Determine the nozzle price for your machine:
- Find the Price Bracket for your machine by clicking on
the machine make at the bottom of this page. Locate the correct
thread diameter from the pop up chart, and note the Price
Bracket (A, B or C). Note: Machines with female threads use
price Bracket C.
- Click on One-Piece or Two-Piece
Nozzle pricing. Locate nozzle length and Price Bracket.
- For Big Bore pricing, use Price Bracket C on the Two-Piece Nozzle pricing chart
- If thermocouple couple holes are required, add $9.00 for each hole
|
How to Order
Download Nozzle - order/quote form. pdf.
Fill out and fax to 216-535-4823
-
Specify
type of nozzle: One-piece or Two-piece or Big Bore
-
Specify nozzle thread diameter, pitch and thread length
-
Specify rear opening and nozzle overall length
-
For One-piece nozzles, specify style: (standard, reverse taper, full taper), radius, and orifice
-
If thermocouple holes are required, specify location and tap size
|
|
Pricing |
|
|
|
|
|
|
Don't see your machine price bracket?
Use this chart or call:
216-535-4848. |
|
Machine Thread Diameter |
Price Bracket |
|
Up to 2" Up to 50mm |
A |
|
2" to 2 3/4" 50-70mm
|
B |
|
2 3/4" - 3 1/4" 70-85mm
|
C |
|
Female Threads |
D |
|
|
