|
With an adjustable angle of 20º–45º, the Trim Line Adjustable Angle conveyor is perfect for under the press, along side the press or for moving parts to a trunkline, work station or automatic box filling system. Horizontal to inclined transition rollers eliminate pinch points and assure smooth part transfer.
Combined Lengths: up to 15'
Available Widths: 6", 9", 12", 18", 24"
Standard Features
- Direct Drive 1/4 hp 90V DC variable-speed drive package
- No roller chain or sprockets
- Sealed gear reducer
- 50 lbs. maximum load
- Adjustable angle incline 20–45º
- Double V-guided, FDA approved, white PVC belt with 1 1/2" high cleats on 18" centers
- 4" high side rails, lapped over conveyor belt
- Leg sets and swivel castors included. Legs are adjustable up to 34" infeed belt height (specify infeed and discharge belt heights)
- 15' power cord included. Pre-wired, ready to run (except polyphase systems which require some customer wiring)
- Control wiring contained in liquid-tight conduit and connectors
- Units up to 10' length ship fully assembled
- Options
|
Two Ways to Order:
1. Download Conveyor Calculations Sheet pdf.
- Fill in the information in sections C and D—as well as any other information pertinent to your application.
- Fax to 216-535-4823. For questions call 216-535-4848
2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) and please have the following information available:
- The conveyor model you are ordering
- The belt width you need
(standard widths are 6", 9", 12", 18", 24")
- The conveyor infeed length (in feet) you need (A dimension). Minimum length 2 1/2'
- The discharge length (in feet) you need (B dimension). Minimum length 2 1/2'
- Belt speed standard 20 fpm (40 fpm, 80 fpm and variable speed also available)
Note: Additional widths, lengths, belt speeds, etc. are available.
Standard Models (6", 9", 12",
18" widths)
The “A” dimension infeed length
minimum is 2', maximum 7'.
The “B” dimension discharge length
minimum is 2'. A + B can not exceed 15'.
The motor is located at the discharge.
24" wide models
The “A” dimension
infeed length minimum is 2', maximum 7'.
The “B” dimension discharge length minimum is 2. A + B
can not exceed 15'.
The motor is located at the infeed.
|
Standard starter position (specify if other location).
Starter position for 8' or shorter conveyors.