|
|
|
Trim Line Conveyors
|
Trim Line Conveyors are lightweight and easy to move, yet sturdy enough to endure heavy duty industrial use. All include our low-maintenence Direct Drive drive package, variable-speed drive, double v-guide belt tracking, legs sets and castors.
|
|
 |
|
|
|
|
|
Strong, multiple use conveyor. Use under the press, trunkline, overhead, assembly etc. Many available options. |
A wide choice of options allow these sturdy, cleated incline conveyor to be customized to fit your needs. |
Horizontal to inclined transition rollers eliminate pinch points and assure smooth part transfer.
|
|
|
Exclusive Features |
-
Aluminum
or Steel . . . it’s your choice - choose aluminum for
greater portability, steel for maximum heavy duty industrial
wear.
-
Direct
Drive Package: The motor and SEALED GEAR REDUCER
attach directly to the pulley shaft, minimizing maintance.
-
No
roller chain or sprockets to
align.
-
50 lbs.
load rating.
-
Leg Sets
and Castors included (adjustable up to 34" belt height).
-
Double
V-Guide Belt Tracking: Our new, double V-guide provides
exceptionally stable belt tracking, which significantly
extends belt life. Guides are on the sides rather than the
middle make
it easier to track the belt.
-
Semi-Modular
Construction: EMI belt conveyors are built in sections to
allow future changes
in belt length, if desired.
|
Specifications |
- Drive Package:
The Direct Drive package includes a C-faced, TEFC 1/4 hp 90V DC motor
with a variable speed controller. Choose from 20, 40
or 70 fpm. 15' of SJ cord with a standard three-prong plug is pre-wired
to the starter (other voltage and motor starters available). Control
wiring is contained in liquid tight conduit and connectors. Drive
packages for conveyors 3'–20' long have 50 lbs. maximum load.
NOTE: We do not
recommend running the motor at less than 1/3 of the overall output
(speed), as this could result in lowering the life expectancy of the
motor. If you are planning on running at less than 1/3 of the output,
please consult an EMI Representative.
- Belt
guidance:
True Track Belt Guidance System comes standard on 3'–20'
long conveyors. Using a Double V-guide slot in the frame,
1/4" wall crowned pulleys, and bonded Double V-guide
belting, “True
Track” minimizes belt run off and reduces belt tracking
maintenance.
- Pulleys:
To ensure long lived operation, 2 3/8," diameter crowned
pulleys incorporate 5/8" diameter steel shafts, self
aligning sealed ball bearings,
telescopic take-up
adjustment, position locking nuts, and Zerk grease fittings.
|
- Belting:
Our easy to clean, FDA approved, white, PVC belting with staple-type
belt lacing (which prevents lacing pullout and splice failure), makes
belt maintenance quick and easy. Inclined conveyors have a bottom
cleat support plate and bonded flexible cleats that have no bolts
or rivets that may tear out.
- Frame: Choose
from 1/8" anodized sheet aluminum for greater portability, or
12-gauge OSHA orange painted steel for maximum stability. Both are
built to withstand heavy-duty industrial wear.
- Rails:
To ensure molded pieces do not get pinched, damaged, or lost between
the rail and belt, we place either 12-gauge or 1/8" anodized
aluminum 2" or 4" rails (depending on model) so that
they overlap the belt. To keep your molded parts
contained on the infeed end of the conveyor, we include an infeed-end
backpiece.
- Shipment:
Generally conveyors 3'–10' are shipped fully assembled, pre-wired,
tested, and ready to run (legs must be attached). Conveyors 11' and
over are shipped partially assembled to minimize shipping damage.
Some frame and belt assembly is required; drive packages and system
panels are pre-assembled and tested. For your convenience, arrangements
can be made for longer conveyors to be shipped assembled.
- Leg
Sets:
Adjustable leg sets and locking swivel castors are included as standard on all Trim line conveyors. Belt height must be specified.
|
|
|
|
|
