- Drive Package: The Direct Drive package includes a C-faced, TEFC 1/4 hp 110V AC motor. 15' of SJ cord with a standard three-prong plug is pre-wired to the starter (other voltage and motor starters available). Control wiring is contained in liquid-tight conduit and connectors. Drive packages for conveyors 5'–10' long have 30 lb. maximum load.
NOTE: We do not recommend running the motor at less than 1/3 of the overall output (speed), as this could result in lowering the life expectancy of the motor. If you are planning on running at less than 1/3 of the output, please consult an EMI Representative.
- Belt Guidance: True Track Belt Guidance System comes standard on 5'–10' long conveyors. Using a Double V-guide slot in the frame, wall crowned pulleys, and bonded Double V-guide belting, “True Track” minimizes belt run off and reduces belt tracking maintenance.
- Pulleys: To ensure long lived operation, 2" diameter crowned pulleys incorporate B⁄₈" diameter steel shafts, self-aligning sealed ball bearings, telescopic take-up adjustment, position locking nuts, and Zerk grease fittings.
|
- Belting: Our easy to clean, FDA approved, white, PVC belting with staple-type belt lacing (which prevents lacing pullout and splice failure ), makes belt maintenance quick and easy. Inclined conveyors have a bottom cleat support plate and bonded flexible cleats that have no bolts or rivets that may tear out.
- Frame: 1/8" anodized sheet aluminum for greater portability and maneuverability.
- Rails: To ensure molded pieces do not get pinched, damaged, or lost between the rail and belt, we place ¹⁄₈" anodized aluminum, 2" rails so they overlap the belt . To keep your molded parts contained on the infeed end of the conveyor, we include an infeed-end backpiece.
- Shipment: Generally conveyors 5'–10' are shipped fully assembled, pre-wired, tested, and ready to run (except legs are unattached).
- Leg Sets: Adjustable leg sets and locking swivel castors are included as standard on all ProLumina conveyors. Belt height must be specified.
|
