ProLumina Conveyors | Flat | Incline

ProLumina Conveyors
Flat Belt Model PF

EMI's aluminum frame, ProLumina conveyor is built using our interlocking, slot and groove technology. Features include:

Excellent stability and a smooth, clean profile
The drive motor, gear box, belt and leg sets are the same high quality as those provided on our higher priced models

Widths: 6", 12", 18" and 24"
Lengths: 5', 6', 7’, 8', 9', 10'

Standard Features

Direct Drive 1/4 hp 110/60/1 C-Faced 20 fpm drive package. (Note: M1 standard location, see drawings)
No roller chain or sprockets
Sealed gear reducer
1/8" anodized aluminum construction
30 lbs. maximum load
Double V-guided, FDA approved, white PVC belt. Incline model has 1 1/2" high flexible cleats on 18" centers
2" x 90-degree aluminum side rails
Steel leg sets with swivel castors (specify belt heights 11" min, 48" max.)
15' power cord included. Pre-wired ready to run

Available Options

40 fpm 1/4 hp 90V DC C-Faced variable-speed drive package - $233
Motor and Switch Locations: M2, M7, M8 - $21
2" x 90 degree Stainless Steel Side Rails - $12 per ft
Stainless Steel Discharge Chute - $67
Deduction of Leg Sets. (min. belt height 6") Note: leg plates remain on conveyor when the leg sets are deducted - subtract $40
Robotic Indexing option. Conveyor must have the variable speed option for indexing

Two Ways to Order:

1. Download Conveyor Calculations Sheet pdf.

Fill in the information in sections C and D—as well as any other information pertinent to your application.
Fax to 216-535-4823. For questions call 216-535-4848

2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) - please have the following information available:

The conveyor model you are ordering
The belt width you need (standard widths are 6", 12", 18", 24")
The conveyor length (in feet) you need (standard lengths are 5'–10' in 1ft increments)
Belt speed standard 20 fpm (40 fpm variable speed also available)
The conveyor infeed belt height and the discharge belt height you want

Conveyor Length	Belt Width
	6"	12"	18"	24"
5'	$1,259	$1,335	$1,390	$1,446
6'	$1,321	$1,409	$1,470	$1,530
7'	$1,384	$1,488	$1,557	$1,624
8'	$1,446	$1,561	$1,634	$1,707
9'	$1,510	$1,640	$1,721	$1,802
10'	$1,567	$1,709	$1,795	$1,880

BW = Belt width.
M-1 Standard motor location
M-2, M-7, M-8 Alternate motor locations
Horsepower determination charts pdf | Leg location and leg count charts pdf.

Robotic Indexing Control Option

The EMI indexing option S-44-Pro, is a 110/1/60 VAC, NEMA 1, electrical control system, designed to index a conveyor when a 24VDC or dry contact index signal is sent. This system includes:

A NEMA 1 enclosure
A control relay with a timing module
A twist lock plug and receptacle mounted on cord to connect the ProLumina conveyor to control enclosure
A twist lock plug and receptacle to connect the 24V DC index signal to the control enclosure
A twist lock plug and receptacle to connect the dry contact index signal to the control enclosure

To install the S-44-Pro, simply replace the existing conveyor plug with a twist lock plug. Once the plug has been replaced, the conveyor is ready to be plugged directly into the control. This reduces set up times by eliminating the need to hardwire, drill holes in the box, etc.

Even existing ProLumina conveyors can easily be field retrofitted with the S-44-Pro indexing control should the need arise. In addition to providing a simplified means of adding indexing to a robotic or box filling application, the unit also provides a great deal of flexibility for short runs or when indexing may be needed on different machines at different times. Price: $456.00


Standard Conveyors Trim Line \| ProLumina \| Merit \| Signature \| Clean Room \| Z Style \| Nose Over \| Scoop Cleated \| Pedestal \| Folding Flat/Incline

ProLumina Conveyors Flat Belt Model PF

ProLumina Conveyors
Flat Belt Model PF