Pedestal-Style Conveyor
Model CLR

The CLR is ideal for short distance transfer of parts out of the molding machine and depositing them into a box or onto a beside press work station. The belt can be adjusted to incline up to 20° and stand height is adjustable, allowing the CLR to fit a variety of machine heights. Part/runner separators work very well on this conveyor.

Available Lengths: 4', 5', 6', 7' Available Widths: 12", 18", 24", 30", 36" Standard Features Direct Drive 1/3 hp 110/60/1 C-Faced drive package (80 fpm uses 1/2 hp drive pak) No roller chain or sprockets Sealed gear reducer 12-gauge steel construction Double V-guided, FDA approved, white PVC belts 4" high side rails, lapped over conveyor belt Side belt guards H-Style leg stand included with 2" wheels for easy placement under press 15' power cord included. Pre-wired, ready to run (except polyphase systems which require some customer wiring) Control wiring contained in liquid-tight conduit and connectors Units shipped fully assembled	Two Ways to Order: 1. Download Conveyor Calculations Sheet pdf. Fill in the information in sections C and D—as well as any other information pertinent to your application. Fax to 216-535-4823. For questions call 216-535-4848 2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) - please have the following information available: The conveyor model you are ordering The belt width you need (standard widths: 12", 18", 24", 30", 36") The conveyor length you need: 4', 5', 6', 7' only Belt speed: 20, 40, or 80 fpm

BW=Belt width.


Standard Conveyors Trim Line \| ProLumina \| Merit \| Signature \| Clean Room \| Z Style \| Nose Over \| Scoop Cleated \| Pedestal \| Folding Flat/Incline

Pedestal-Style Conveyor Model CLR

Pedestal-Style Conveyor
Model CLR