|
|
|
Merit Line Conveyors
|
Sturdy and reliable even under the most demanding applications, Merit Line Conveyors are designed to meet a wide range of conveying needs. Hundreds of pre-engineered
options allow them to be tailored to your particular need.
|
|
|
| |
|
|
|
Strong, multiple use conveyor. Use under the press, trunkline, overhead, assembly etc. Many available options. |
A wide choice of options allow these sturdy, cleated incline conveyor to be customized to fit your needs. Shown with optional hopper. |
Perfect for under the press, box filling applications, etc. Horizontal to incline transition rollers eliminate pinch points and assure smooth part transfer. |
|
|
Exclusive Features |
-
Aluminum
or Steel . . . it’s your choice - choose aluminum for
greater portability, steel for maximum heavy duty industrial
wear.
-
Direct
Drive Package: The motor and SEALED GEAR REDUCER
attach directly to the pulley shaft, minimizing maintance.
-
No
roller chain or sprockets to
align.
-
150 lbs.
load rating.
-
Leg Sets
and Castors included (adjustable up to 34" belt height).
-
Double
V-Guide Belt Tracking: Our new, double V-guide provides
exceptionally stable belt tracking, which significantly
extends belt life. Guides are on the sides rather than the
middle make
it easier to track the belt.
-
Semi-Modular
Construction: EMI belt conveyors are built in sections to
allow future changes
in belt length, if desired.
|
Specifications |
- Drive Package: The Direct Drive package includes a C-faced, TEFC 1/3
hp motor. Motors through 1 hp are 110/60/1 voltage and come with a thermal
protected toggle switch motor starter in a NEMA 1 enclosure. 15' of SJ
cord with a standard three-prong plug is pre-wired to the starter (other
voltage and motor starters available). Control wiring is contained in
liquid tight conduit and connectors. Drive packages for conveyors 3'–30'
long have 150 lbs. maximum load (drive packages for heavier loads are
available).
NOTE: If an optional
variable speed drive is purchased, we do not recommend running the
motor at less than 1/3 of the overall output
(speed), as
this could result in lowering the life expectancy of the motor. If
you are planning on running at less than 1/3 of the output,
please consult
an EMI Representative.
- Belt
guidance: True Track Belt Guidance System comes standard
on 3'-30' long conveyors. Using a Double V-guide slot in the frame,
1/4" wall crowned pulleys, and bonded Double V-guide
belting, “True
Track” minimizes belt run off and reduces belt tracking maintenance.
- Pulleys:
To ensure long lived operation, 3 1/2" diameter
crowned pulleys incorporate 1" diameter shafts,
self aligning sealed ball bearings with eccentric locking
collars, telescopic take-up
adjustment, position locking nuts, and Zerk grease fittings.
|
- Belting: Our easy to clean, FDA approved, white, PVC belting
with staple-type belt lacing (which prevents lacing pullout and splice
failure), makes belt maintenance quick and easy. Inclined conveyors have
a bottom cleat support plate and bonded flexible cleats that have no bolts
or rivets that may tear out.
- Frame: Choose from 1/8" anodized sheet aluminum
for greater portability, or 12-gauge painted (light grey) steel for
maximum stability. Both are built to withstand heavy-duty industrial
wear.
- Rails: To
ensure molded pieces do not get pinched, damaged, or lost between
the rail and belt, we place either 12-gauge or 1/8" anodized
aluminum 4" rails so that they overlap the belt by 1/2".
To keep your molded parts contained on the infeed end of the conveyor,
we include an infeed-end backpiece.
- Shipment: Generally conveyors 3'–10' are shipped fully
assembled, pre-wired, tested, and ready to run (legs must be attached).
Conveyors 11' and over are shipped partially assembled to minimize
shipping damage. Some frame and belt assembly is required; drive packages
and system panels are pre-assembled and tested. For your convenience,
arrangements can be made for longer conveyors to be shipped assembled.
- Leg Sets: Quick adjusting leg sets and locking swivel castors are included as standard on all Merit Line conveyors.
Belt height must be specified.
|
|
|
|
