Scoop-Cleated Incline Conveyor
Model RMSC

Lengths: 7' to 16'
Available Widths: 12", 18", 24"

Standard Features

• 1/3 hp 110/60/1 C-faced sprocket drive package. 80 fpm uses 1/2 hp drive pak)
• Sealed gear reducer 12-gauge steel construction
• Double V-guided, FDA approved, white Nitrile belt with 2 1/2" high bonded flexible cleats on 9" centers
• 4" high side rails, lapped over conveyor belt
• Adjustable angle (65° to 75°) stand with painted black steel legs and locking castors included (as illustrated)
• Stainless steel accumulation hopper, discharge shroud and chute included
• 15' power cord included. Pre-wired, ready-to-run (except polyphase systems which require some customer wiring)
• Control wiring contained in liquid-tight conduit and connectors
• Units up to 10' length ship fully assembled

Standard Hopper Sizes

• 12" belt width: 7 1/2 cu. ft.
• 18" belt width: 8 1/2 cu. ft.
• 24" belt width: 9 1/4 cu. ft.

Two Ways to Order:

1. Download Conveyor Calculations Sheet pdf.

• Fill in the information in sections C and D—as well as any other information pertinent to your application.
• Fax to 216-535-4823. For questions call 216-535-4848

2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) - please have the following information available:

• The conveyor model you are ordering
• The belt width you need (standard widths: 12", 18", 24")
• The conveyor length (in one ft. increments) you need (standard lengths - 7' to 16')
• Belt Speed - 20, 40, 80 fpm (20 fpm standard). Additional belt speeds available
• The part discharge Belt Height you want

BW=Belt width.
W dimension is belt width + 14.5" on 10' and shorter conveyors.
W dimension is belt width + 48" on 11' and longer conveyors.
L dimension is 42" minimum - 54" maximum. for 7' through 10' conveyors.
L dimension is 61" minimum for 11' through 16' conveyors.