|
|
|
|
Positioned under an extrusion blow molding machine, EMI's two level, Blow Molding, Conveyor-Separator separates bottles and scrap as they
fall from the press.
|
How does it work?
- Parts,
tails and moils fall onto the upper, roller conveyor.
- As they
are moved along by the rollers, the tails and moils fall through
the cracks between the rollers onto a lower level, belt conveyor.
- The lower
conveyor moves them in the opposite direction, out of the system.
|
|
Click on images for greater detail |
Side rails adjust the conveyor width to contain and orient the bottles. Rollers adjust to provide the proper gap through which tails and moils fall.
A variable speed drive assists in obtaining the best separation. |
Features
include: Stainless steel, removeable, hinged side rails - variable
speed controller - quick release hatch - adjustable height stand
with castors and more. |
Standard Features |
Common Options |
- Available in 12" belt width and lengths from 6'-15', in one foot increments
- Heavy-duty, 12-gauge steel construction
- Adjustable gap galvanized steel driven rollers for bottle conveying and scrap separating
- V-guided, FDA approved, white PVC belt, lapped under side rails, for tail and moil conveying
- 7" high 60° stainless steel adjustable width, side rails for orienting bottles onto rollers
- Leg sets with castors included. Specify belt heights
- 15' power cord included. Pre-wired, ready-to-run
- Control wiring contained in liquid-tight conduit and connectors
- 110/60/1 DC, 0-80 FPM, variable speed drive
- Units up to 10' length ship fully assembled
|
- Heat Shrinkable Tubing installed on Separation Rollers to provide improved traction
- Urethane Coated Rollers to minimize bounce
- Reversing DC Drive
- Bull Gear Drive, to create the same direction of travel for bottles and scrap
- Extension of Roller Section
- Shortening of Roller Section
|
|
