Signature Line Steel Frame Conveyors
Fixed Angle, Flat to Incline Model KK

Available Lengths: 3' to 15'
Available Widths: 6", 9", 12", 18", 24", 30"

Standard Features

• Available with 15°, 30° or 45° discharge angle
• Direct Drive 1/3 hp 110/60/1 C-faced drive package (80 fpm uses 1/2 hp drive pak)
• No roller chain or sprockets
• Sealed gear reducer
• 12-gauge steel construction
• 50 lb. maximum load
• Double V-guided, FDA approved, white PVC belt with 1 1/2" high flexible cleats on 18" centers
• 4" high side rails lapped over the conveyor belt with Lexan infeed flapper
• Bottom slide tray protects cleats
• Leg sets and swivel castors included
• 15' power cord included. Pre-wired, ready to run (except on polyphase systems which require customer wiring)
• Control wiring contained in liquid-tight conduit and connectors
• Units ship fully assembled
• Options

Lengths: to 15'
Widths: 9", 12", 18", 24"
Quick Ship Conveyors ship within 10 working days

Two Ways to Order:

1. Download Conveyor Calculations Sheet pdf.

• Fill in the information in sections C and D—as well as any other information pertinent to your application.
• Fax to 216-535-4823. For questions call 216-535-4848

2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) and please have the following information available:

• The conveyor model you are ordering
• The belt width you need (standard widths are 6", 9", 12", 18", 24", 30")
• Determine the infeed and discharge lengths (in feet):
• For 6", 9", 12", and 18" belt width models, the motor is located at the discharge. The “A” dimension infeed length minimum is 1', max is 7'. The “B” dimension discharge length minimum is 2'. A + B can not exceed 15'
• For 24" and 30" wide models, the motor is located at the infeed. The “B” dimension discharge length minimum is 2', max is 7'. The “A” dimension infeed length minimum is 1'. A + B can not exceed 15'
• Belt speed (standard speeds - 20, 40 or 80 fpm)
• The conveyor infeed belt height

BW = Belt width.
Standard starter position (specify if other location).
Starter position for 8' or shorter conveyors.
Drive will be mounted on the infeed for 24" and 30" wide models
2' and 3' "B" dimension = 20 to 45 degree angle adjustment.
4' and 6' "B" dimension = 12 to 45 degree angle adjustment.
Horsepower determination charts pdf | Leg location and leg count charts pdf.