Phone: 216-535-4848     •     FAX: 216-535-4823     •    Sales@EMIcorp.com
 
  Conveyors & Automation Systems  
 
Standard Models
Quick Ship
Box & Bag Filling Systems
Robot Interface
Quality Control
& Parts Diverting
Parts Cooling
Flat-Top Chain
Roller Conveyors
Specialty Conveyors
 • Part/Runner Separators
 • Grinder Feeding
 • Metal Detection
 • Belt Turns
 • Rope Belt
 • Turntables
 • Extrusion Takeaway
Specialty Applications
Conveyor Options
Forms & Reference

Signature Line Steel Frame Conveyors
Flat Belt Model RM

These strong steel-framed conveyors have a multitude of uses. They can be used under the press or along side the press, in trunk line systems, assembly stations, etc. Standard units are rated for a 150 lb. load, but higher capacities are available. Optional "soft drop" zones to minimize part bounce. Hundreds of options available.
Available Lengths: 3' to 50'
Available Widths: 6", 9", 12", 18", 24", 30", 36", 42", 48", 54", 60", 66", 72"

Standard Features
  • Direct Drive 1/3 hp 110/60/1 C-Faced drive package (80 fpm uses 1/2 hp drive pak)
  • No roller chain or sprockets
  • Sealed gear reducer
  • 12-gauge steel construction.
  • Double V-guided, 3'–30' lengths, FDA approved, white PVC belt
  • 4" high side rails, lapped over conveyor belt
  • 15' power cord included. Pre-wired ready to run (except polyphase systems which require some customer wiring)
  • Control wiring contained in liquid-tight conduit and connectors
  • Units up to 10' length ship fully assembled
  • Options


Lengths: 3' to 20'
Widths: 12", 18", 24", 30", 36"
Quick Ship Conveyors ship within 10 working days
Two Ways to Order:

1. Download Conveyor Calculations Sheet pdf.
  • Fill in the information in sections C and D—as well as any other information pertinent to your application.
  • Fax to 216-535-4823. For questions call 216-535-4848
2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) and please have the following information available:
  • The conveyor model you are ordering
  • The belt width you need
    (standard widths are 6", 9", 12", 18", 24", 30", 36", 42", 48", 54", 60", 66", 72")
  • The conveyor length (in feet) you need (standard lengths - 3' to 50')
  • Belt speed (standard speeds - 20, 40 or 80 fpm)
  • The conveyor infeed belt height and the discharge belt height

Note: Additional widths, lengths, belt speeds, etc. are available.
BW = Belt width.
Standard starter position (specify if other location).
Starter position for 8' or shorter conveyors.
Horsepower determination charts pdf | Leg location and leg count charts pdf.


 
 
Terms of Use | Privacy Policy | Terms of Sale
Sales & Design Engineering
28300 Euclid Avenue
Wickliffe, Ohio 44092


Manufacturing
427 West Pike Street
P.O. Box 590
Jackson Center, Ohio 45334

© 2012 EMI Plastics Equipment. All rights reserved.
EMI Corp Mexico China