|
|
|
 |
Merit Line Conveyors
Aluminum Models ADF, ADC & ADK
|
Up to 48% lighter than steel EMI conveyors!
|
|
Available in your choice of aluminum or steel, our very popular Merit Line conveyors are sturdy enough to endure even the toughest industrial use. Low maintenence,
direct drive drive package and a payload of 150 lbs make these the perfect choice for a wide range of industrial applications (higher load capacities are available).
Semi-modular construction allows easy future modifications.
|
|
|
ADF Model
Flat conveyor - use under the press, along side the press,robotic indexing, etc.
Click image for larger view. |
ADC Model
Incline conveyor - move parts up to work stations, box-filling stations, etc.
Click image for larger view. |
ADK Model
Angle adjustment 20° to 45°. Note: for 24" & 30" wide units, the drive package is located on the infeed end, pushing the belt.
Click image for larger view. |
Standard Features |
Quick Ship Lengths |
-
Direct Drive 1/3 HP 110/60/1 C-Faced Drive package (80 FPM uses 1/2 HP Drive Pak)
-
Standard speeds 20, 40, 80 FPM (specify)
-
No roller chain or sprockets
-
Sealed gear reducer
-
¹/8" anodized aluminum construction
-
8 motor locations
-
Double V-guided, FDA approved, white PVC belt.
-
1½" high cleats on 18" centers (ADC & ADK models)
-
4" high side rails lapped over conveyor belt
-
Standard leg sets with swivel castors included (shown)
-
15' power cord included. Pre-wired ready-to-run (except polyphase systems which require some customer wiring)
-
Control wiring contained in liquid-tight conduit and connectors
-
Units up to 10’ length shipped fully assembled
|
ADF & ADC: 3' - 20'
ADK: 5' - 15'
- Minimum infeed length 2 1/2 ft., max. 7 1/2 ft.
- Minimum discharge length 2 1/2 ft.
- Infeed plus discharge lengths can not exceed 15 ft.
|
|
