|
|
|
Part/Runner Separation
|
|
Versatile finger style separators features interchangeable fingers that can be repositioned to suit a wide range of applications.
|
Positioned at the end of a conveyor—roller separators allow small parts to drop through the gap, large parts to pass over.
|
Auger-Style
Separator
Adjustable auger carries the larger part to the side, and allows the smaller to pass under to a discharge chute.
|
Free Part/Runner Separation Evaluation
|
Send
us your parts and runners and we will test them on our equipment
to determine the best separation method for your application.
We will need the following:
- Sample parts and runners:
Send at least three complete shots. Be sure the runners are typical
of the runners that the separator must work on i.e., if you run
a fast cycle and the runners curl up, send us curled up runners.
- Cycle Time:
What is the cycle time of your molding machine in seconds?
- Conveyor Style:
What is your preference of conveyor style i.e., flat belt, cleated
belt, etc.
Fill out the Conveyor
Specifications form.
- Press Dimensions:
Complete the press
dimensional data form.
|
Send samples and forms to:
EMI CORP.
427 W. Pike St.
Jackson Center, Ohio 45334
(Be sure to include your name, phone and company name.) |
|
|
