Merit Line Conveyors | Flat | Incline | Adjustable Angle

Merit Line Conveyors
Adjustable Angle Models ADK & DDK
Aluminum or Steel

An adjustable angle of 20º–45º, makes this Adjustable Angle conveyor perfect for under the press, along side the press or for moving parts to a trunkline, work station or automatic box filling system. Horizontal to inclined transition rollers eliminate pinch points and assure smooth part transfer. Angles and leg sets are easy to adjust.

Combined Lengths: 5' to 15' Available Widths: 6", 9", 12", 18", 24", 30" Standard Features Angle adjustment 20° to 45° Direct Drive 1/3 hp 110/60/1 C-Faced Drive package (80 fpm uses 1/2 hp Drive Pak) No roller chain or sprockets Sealed gear reducer 50 lbs. maximum load 1/8" anodized aluminum sheet Double V-guided, FDA approved, white PVC belt with 1½" high cleats on 18" centers Belt speed: 20 fpm (40 & 80 fpm variable speed also available) 4" high side rails, lapped over conveyor belt Leg sets and swivel castors included 15' power cord included. Pre-wired ready to run (except polyphase systems which require some customer wiring) Control wiring contained in liquid-tight conduit and connectors All units ship fully assembled Combined Lengths: 5'–15' Infeed length: 2 1/2 ft., max. 7 1/2 ft. Minimum discharge length: 2 1/2 ft. Infeed plus discharge lengths can not exceed 15 ft. Widths: 9", 12", 18", 24" Quick Ship Conveyors ship within 10 working days	Two Ways to Order: 1. Download Conveyor Calculations Sheet pdf. Fill in the information in sections C and D—as well as any other information pertinent to your application. Fax to 216-535-4823. For questions call 216-535-4848 2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) and please have the following information available: The conveyor model you are ordering The belt width you need (standard widths are 6", 9", 12", 18", 24", 30") The conveyor infeed length (in feet) you need (A dimension). Minimum length 2 1/2' The discharge length (in feet) you need (B dimension). Minimum length 2 1/2' Belt speed standard 20 fpm (40 fpm, 80 fpm and variable speed also available) Note: Additional widths, lengths, belt speeds, etc. are available. Standard Models (6", 9", 12", 18", 24" widths) The “A” dimension infeed length minimum is 2 1/2', maximum 7 1/2'. The “B” dimension discharge length minimum is 2' 1/2". A + B can not exceed 15'. The motor is located at the discharge. 24" & 30" wide models The “A” dimension infeed length minimum is 2 1/2', maximum 7 1/2'. The “B” dimension discharge length minimum is 2' 1/2". A + B can not exceed 15'. The motor is located at the infeed.

BW = Belt width. Standard starter position (specify if other location). Starter position for 8' or shorter conveyors. Horsepower determination charts pdf \| Leg location and leg count charts pdf.


Standard Conveyors Trim Line \| ProLumina \| Merit \| Signature \| Clean Room \| Z Style \| Nose Over \| Scoop Cleated \| Pedestal \| Folding Flat/Incline

Merit Line Conveyors Adjustable Angle Models ADK & DDK Aluminum or Steel

Merit Line Conveyors
Adjustable Angle Models ADK & DDK
Aluminum or Steel