|
|
Variable
speed
|
| 230/60/1
or 220-440/60/3 Electrics. |
| Special
Hoppers |
Start-Stop
controls
|
|
|
Standard
Conveyors
Trimline l Merit l Signature l Z
Style l Nose Over l Scoop
Cleated
Pedestal l Folding
flat/incline l Fixed angle
flat/incline
Scoop
Cleated Incline Conveyor - Steel
frame
Scoop
Cleated, Incline
Conveyor - Model RMSC
 This
specialty conveyor uses extra deep scoop cleats and a cleat
trap to lift small- to medium-sized parts.
It is ideal for conveying parts to secondary equipment such
as cap lining
or assembly machines.
Included
is a stainless steel accumulation hopper, a stainless steel
discharge shroud and
chute and a portable stand (with castors). The angle adjusts
between 65° and
75°. Stand
is sized to the conveyor length to provide maximum mobility
and sturdiness. Available in three
belt speeds.
20,
40 or 80 FPM. To assure proper
design, please send sample parts and runners to EMI for evaluation.
Click
on photo for larger image |
| RMSC
- Scoop cleated, Incline Conveyor |
Lengths
- 7' to 16'
Available Widths -
12", 18", 24" |
| Standard
Features |
- 1/3 HP
110/60/1 C-Faced Sprocket Drive package. 80 FPM uses 1/2
HP Drive Pak).
- Sealed
gear reducer.
12 gauge steel construction.
- Double
V-guided, FDA approved, white Nitrile belt with 2 1/2" high
bonded flexible
cleats on 9" centers.
- 4" high side rails, lapped
over conveyor belt.
- Adjustable
angle (65° to 75°) stand with painted black steel
legs and locking castors included (as illustrated).
- Stainless
steel accumulation hopper, discharge shroud and chute
included.
- 15' power
cord included. Pre-wired, ready-to-run (except polyphase
systems which require some customer wiring).
- Control
wiring contained in liquid-tight conduit and connectors.
- Units
up to 10' length ship fully assembled.
|
|
