Extrusion Take Away Conveyors

Specialty Conveyors
Belt turns l Blow mold separators l Cooling l Extrusion take away
Flat top chain l Grinder feeding l Metal detection l Roller l Rope belt

Extrusion Take Away Conveyors

EMI offers a wide choice of Extrusion Take Away Conveyors. Standard options allow each conveyor to be customized to meet your specific application needs.

Click on images for greater detail

Adjustable air hoses provide maximum flexibility
This Extrustion Conveyor uses air pressure to move cut extrusions off of the conveyor into a catch tray on the side.
Adjustable air hoses allow each air nozzle to be easily moved, depending upon the length of the extrusions. Air pressure can also be adjusted to accomodate varying weights.

Narrow infeed and footprint
A narrow infeed area and footprint, allow this Extrusion Take Away Conveyor to get as close as possible to the extrusion cutter.

Water spray cooling for extrusions

If you need to cool an extrusion or part quickly, a water spray can sometimes be the perfect choice. This application uses three water sprayers to spray a fine mist of water down onto hot extrusions as they pass underneath. Water drains off through a wire mesh belt, into a stainless steel pan below. To allow the extrusions to be packed immediately, two air knives blow off residual water.