 |
|
|
|
|
|
 |
 |
 |
 |
 |
|
 |
|
||||
 |
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
|
|
|
 |
Cooling
Conveyors
Ambient air l Chilled
air l Self contained l Water
cooling l Belting options l Hybrid
Cooling
Conveyors - Belting Options
Belting that allows air to circulate freely around and under parts, is an excellent way to promote cooling. Belting can be used alone, or with additional cooling aids such as blown ambient air or chilled air. Choices include Intralox™, flat wire belting or rope belting. |
Click on images for greater detail |
Plastic
conveyor belting (which requires nylon wear strips and
a sprocket drive) is easily installed on EMI conveyors.
Typical
applications include |
|
Flat Wire Belting
|
Rope Belt Conveyors are often recommended when running thick wall parts or large hot parts that could be damaged when dropped onto a belt conveyor. Make of polyurethane and supported by grooved plastic supports on the conveyor slide tray, rope belting provides a soft drop and part cooling, air circulation beneath conveyed parts.The adjustable spacing feature of a Rope Belt allows it to be adapted to a variety of part configurations. |
Intralox™ Plastic
Belting
robotic
installations and
cooling tunnels. Nylon
wear strips also promote air circulation underneath the
belt. Intralox™ belting,
although more expensive than standard belting, can pay
for itself in the long run - if a problem or wear
on the belt occurs simply replace a section of the belt.
Ideal for moving high temperature molded parts
and providing air cooling as they move. Most any EMI flat
or inclined conveyor can include the flat wire belting option.
(Which requires nylon wear strips). The sprocket drive assures
smooth movement. Flat wire belting can be either carbon or
stainless steel.
Rope Belting
 |
|
| © 2007 EMI Plastics Equipment. All rights reserved. | Contact us at 800-543-6169 or Sales@EMIplastics.com |