|
|
Specialty
Conveyors
Belt
turns l Blow mold separators l Cooling l Extrusion
take away
Flat top chain l Grinder
feeding l Metal detection l Roller l Rope
belt
Blow
Mold Separators - Model BMS2 |
| Lengths
- 6' to 15' |
Click
on images for greater detail
|
| Positioned
under an extrusion blow molding machine, EMI's two level, Blow
Molding, Conveyor-Separator separates bottles and scrap as they
fall from the press. |
| How
does it work? |
|
- Parts,
tails and moils fall onto the upper, roller conveyor.
- As they
are moved along by the rollers, the tails and moils fall through
the cracks between the rollers onto a lower level, belt conveyor.
- The lower
conveyor moves them in the opposite direction, out of the system.
|
|
|
|
Side rails
adjust the conveyor width to contain and orient the bottles. Rollers
adjust to provide the proper gap through which tails and moils
fall.A variable
speed drive assists in obtaining the best separation.
|
Features
include: Stainless steel, removeable, hinged side rails - variable
speed controller - quick release hatch - adjustable height stand
with castors and more. |
| Standard
features - |
- Available
in 12" belt width and lengths from 6'-15', in one foot increments.
- Heavy-duty,
12 gauge steel construction.
- Adjustable
gap galvanized steel driven rollers for bottle conveying and
scrap separating.
- V-guided,
FDA approved, white PVC belt, lapped under side rails, for
tail and moil conveying.
- 7" high
60° stainless steel adjustable width, side rails for orienting
bottles onto rollers.
- Leg
sets with castors included. Specify belt heights.
- 15'
power cord included. Pre-wired, ready-to-run.
- Control
wiring contained in liquid-tight conduit and connectors.
- 110/60/1
DC, 0-80 FPM, variable speed drive.
- Units
up to 10' length ship fully assembled.
|
|
