Folding Signature, Flat to incline conveyor

Standard Conveyors
Trimline l Merit l Signature l Z Style l Nose Over l Scoop Cleated
Pedestal l Folding flat/incline l Fixed angle flat/incline

Signature Model CAR l Economy Model CA

Signature Line - Steel Frame Conveyors

Folding, Flat to Incline - Model CAR

This compact, folding, under press conveyor is an excellent choice for moving small to mid-sized parts from under the press to a table, conveyor, gaylord or box-filling system.

The slave-driven infeed section pivots, allowing the discharge section to be set at any angle from 15° to 45°. Modular construction allow it to be customized to fit a wide range of application needs.

The CAR conveyor folds easily for storage. Note: in order for the conveyor to fold, the infeed end must not be equipped with side rails, and the infeed length must be equal to or less than the discharge length.

Click on photos for larger images

CAR - Folding, Flat to Adjustable Angle Conveyor

Combined Lengths - to 20'
Available Widths - 12", 18", 24", 30", 36"

Standard Features

1/3 HP 110/60/1 C-Faced Drive package (80 FPM uses 1/2 HP Drive Pak).
150 lbs. maximum load.
12 gauge steel construction.
Double V-guided, FDA approved, white PVC belts. Discharge section belt with 1 1/2" high flexible cleats on 18" centers.
4" high side rails lapped over conveyor belt. Side belt guards on the infeed section.
Lexan Transfer Flapper between sections.
15' power cord included. Pre-wired, ready-to-run (except polyphase systems which require some customer wiring).
Control wiring contained in liquid-tight conduit and connectors.
Units up to 10' length ship fully assembled.
Leg set with (2) 6" wheels on discharge
end included.