Part Runner Separation
Overview l Finger style l Roller style l Auger style

Part Runner Separation

Overview	Sucessful part/runner separation depends on choosing the correct style of separation for each specific application.
Fingle Style Separators	Roller Style Separators	Auger Style Separator
Versatile finger style separators features interchangeable fingers that can be repositioned to suit a wide range of applications.	Positioned at the end of a conveyor - roller separators allow small parts to drop through the gap, large parts to pass over.	Adjustable auger carries the larger part to the side, and allows the smaller to pass under to a discharge chute.

Free Part/Runner Separation Evaluation.
Send us your parts and runners and we will test them on our equipment to determine the best separation method for your application. We will need the following:
Sample parts and runners	Please send at least 3 complete shots. Be sure the runners are typical of the runners that the separator must work on i.e., if you run a fast cycle and the runners curl up, send us curled up runners.
Cycle Time	What is the cycle time of your molding machine in seconds?
Conveyor Style	What is your preference of conveyor style i.e., flat belt, cleated belt, etc. - please fill out the Conveyor Specifications form.
Press Dimensions	Please fill out the press dimensional data form.
Send samples and forms to: EMI CORP. 427 W. Pike St. Jackson Center, Ohio 45334 (Be sure to include your name, phone and company name.)