Untitled Document

Finger Separators

EMI Finger Separators are often a versatile and cost effective way to separate parts from Runners. Normally positioned at the end of an under press conveyor, Finger Separators are available as either free standing or conveyor mounted units.

Click on images for greater detail

Flat Belt Finger Separators

Inclined Belt, Finger Separators

Available on Models: ADF, DDF, RM & CLR with 12" and 18" belt width.

Available on conveyor Models: ADC, DDC, ADK, DDK, KK, KKI, CAR, RCRD, RM2D, & RMC with 12" and 18" belt width.

Finger Style, part-runner separation can be added to the end of either an under-press, Flat Belt Conveyor or to Cleated Belt, Inclined Conveyors of 12" or 18" widths. Note: Retro-fitting requires that EMI be supplied with the model and serial numbers of the existing conveyor.

Free Standing Finger Separators

Interchangeable Fingers

Feature a 12 gauge, adjustable height, support stand. Belt width is 18" and the belt speed is 40 fpm. They are shipped completely assembled - simply position the legs and they're ready to run.

The fingers on EMI Finger Separators can be pulled out and reconfigured to suit varying application needs.

Time Saver!

Rather than reconfigure the fingers on Finger Separators when changing molds, many molders choose to order additional belts which have been specifically configured to suit that application's specific needs.