Click image for larger view	Click image for larger view Shown with optional hopper	Click image for larger view
ATL Model - Flat conveyor - use under the press, along side the press,robotic indexing, etc.	ATLC Model - Incline conveyor - move parts up to work stations, box-filling stations, etc.	ATLK Model - Angle adjustment 20° to 45°. Move parts from under the conveyor to box-filling, sorting, etc.
Standard Features -
Standard Features Direct Drive 1/4 HP 90V DC Variable Dirve. Standard speeds 20, 40, 60 FPM (specify). NO ROLLER CHAIN OR SPROCKETS. SEALED GEAR REDUCER. 8 motor locations (See page 8). 1/8" anodized aluminum sheet. Double V-guided, 3' - 30' length, FDA approved, white PVC belt. 1½" high cleats on 18" centers (ATLC and ATLK models). 2" (4" ATLK) high side rails lapped over conveyor belt. Standard leg sets and swivel castors (shown). Units up to 10' length are shipped fully assembled. Control wiring contained in liquid-tight conduit and connectors.
ATL& ATLC Quick Ship lengths - 3' - 20' ATLK Quick Ship lengths - 4' - 12' • Minimum infeed length 2 ft., max. 7 ft. • Minimum discharge length 2 ft. • Infeed plus discharge lengths can not exceed 15 ft.

Aluminum l Steel

Trim Line Models
Trim Line conveyors are perfect for many uses including moving parts away from the press to a trunkline, box-filling system or work station. A wide choice of options allow Trim Line Conveyors to be customized to suit many different types of applications. Standard units are rated for a 50 lb. max. load capacity.

Standard Features
• Direct Drive 1/4 HP 90V DC Variable Dirve.
• Standard speeds 20, 40, 60 FPM (specify).
• NO ROLLER CHAIN OR SPROCKETS.
• SEALED GEAR REDUCER.
• 8 motor locations (See page 8).
• Z\," anodized aluminum sheet.
• Double V-guided, 3' - 30' length, FDA approved,
white PVC belt.
• 1½" high cleats on 18" centers (ATLC and
ATLK models).
• 2" (4" ATLK) high side rails lapped over conveyor belt.
• Standard leg sets and swivel castors (shown).
• Units up to 10' length are shipped fully assembled.
• Control wiring contained in liquid-tight conduit and connectors.

STLK and ALTK models only
• Angle adjustment - 20o to 45o.
• Lengths: Minimum infeed length 2 ft., max. 7ft.
• Minimum discharge length 2 ft. Infeed plus
discharge lengths can not exceed 15 ft.