|
|
 |
Signature
Line Conveyors |
Steel
Signature Line Conveyors
RM & RMC Models |
| Built extra
sturdy to endure the rigors of heavy duty, industrial use, RM
and RMC, Signature Line conveyors have been setting the standard
of excellence for over 30 years. Strong steel construction, low
maintenence, Direct Drive drive package and a payload of 150
lbs make these the perfect choice for a wide range of
industrial applications (higher load capacities are available).
Semi modular construction allows future changes. |
 |
|
| RM
Model - Flat conveyor - use under the press, along
side the press, in trunk line systems, robotic indexing, part
cooling, assembly stations etc. |
RMC
Model - Incline conveyor - move parts up to work
stations, box-filling stations, flat conveyors, trunklines,
etc. |
| Standard
Features - |
- Direct
Drive 1/3 HP 110/60/1 C-Faced Drive package (80 FPM uses
1/2 HP Drive Pak).
- Standard
speeds 20, 40, 80 FPM (specify).
- NO ROLLER
CHAIN OR SPROCKETS.
- SEALED
GEAR REDUCER.
- 8 motor
locations (See page 8).
- 12 gauge
steel construction.
- Double
V-guided, 3' - 30' length, FDA approved, white PVC belt.
- 1½" high
cleats on 18" centers (RMC models).
- 4" high
side rails lapped over conveyor belt.
- Units up
to 10' length are shipped fully assembled.
- Control
wiring contained in liquid-tight conduit and connectors.
|
KKI
Quick Ship lengths - 3' - 15'
• Minimum
infeed length 1 ft., max. 7 ft.
• Minimum discharge length 2 ft.
• Infeed plus discharge lengths can not
exceed 15 ft. |
Flat & Incline l Adjustable
Angle
|
