Quick Ship - Merit Line

Click image for larger view	Click image for larger view	Click image for larger view
ADF Model - Flat conveyor - use under the press, along side the press,robotic indexing, etc.	ADC Model - Incline conveyor - move parts up to work stations, box-filling stations, etc.	ADK Model - Angle adjustment 20° to 45°. Note: for 24" & 30" wide units, the drive package is located on the infeed end, pushing the belt.
Standard Features -
Direct Drive 1/3 HP 110/60/1 C-Faced Drive package (80 FPM uses 1/2 HP Drive Pak). Standard speeds 20, 40, 80 FPM (specify). No roller chain or sprockets. Sealed gear reducer. ¹/8" anodized aluminum construction. 8 motor locations (See page 8). Double V-guided, FDA approved, white PVC belt. 1½" high cleats on 18" centers (ADC & ADK models). 4" high side rails lapped over conveyor belt. Standard leg sets with swivel castors included (shown). 15' power cord included. Pre-wired ready-to-run (except polyphase systems which require some cus tomer wiring). Control wiring contained in liquid-tight conduit and connectors. Units up to 10’ length shipped fully assembled.
ADF & ADC Quick Ship lengths - 3' - 20' ADK Quick Ship lengths - 5' - 15' • Minimum infeed length 2 1/2 ft., max. 7 1/2 ft. • Minimum discharge length 2 1/2 ft. • Infeed plus discharge lengths can not exceed 15 ft.

Aluminum l Steel