 |
|
|
|
|
|
 |
 |
 |
 |
 |
|
 |
|
||||
 |
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
Parts
Diverting
Shot Rejection l Reversing
Conveyor l Pivoting Diverters
Gate Style Diverters l Chute
Style Diverters l Turntable
Diverters
Part Diverting Systems
Overview |
Parts diverters are an excellent way to automatically remove bad shots from a system or to automatically fill parts into a container. | |
Process
Control Tie In ~ Removing bad parts from the system |
||
 If a bad part is molded, a Process Control Tie-in signals 2 cylinders to push a side panel down, creating a chute which diverts the part from the system. |
 When a 'Process Control output' signal is received from the molding machine, this conveyor reverses, removing the part from the system. |
 Available as either free standing or conveyor mounted, these systems include a panel that tips when the molding machine signals a bad part. |
Parts
Diverting ~ Automatic container filling |
||
 Gate style diverters open and close on a signal from the molding machine, to divert parts off the conveyor into a containerr. |
 A robot places parts into 4 chutes. Each chute leads to a separate lane on a conveyor. Each lane fills into a container. |
 Turntable style diverter allows maximum number of parts to fill onto the table while preventing parts from dropping on each other. |
For
more information about any of our products or services |
Phone
- 800-543-6169. Email
- Sales@EMIplastics.com |
 |
|
| © 2007 EMI Plastics Equipment. All rights reserved. | Contact us at 800-543-6169 or Sales@EMIplastics.com |