Options
(many more available)

Ionization - prevents small parts from sticking to the conveyor or each other.
Under press hoppers - contains parts.
Ramps - extend full box storage capacity.
Cleat switchs - assure boxes are in the correct fill position.
Lexan covers - keep contaminants out.
Sweep arms - allow boxes to change direction.
Photo eyes - assure boxes are in the correct fill position.
Cooling Chambers - prevent distortion by cooling parts before they are filled.


 



Automated Container Filling Systems
Cycle Count l Weigh Scale l Weigh Hopper l In Line l Side by Side
Over Under l Turntable l Bagfilling l Trunkline l Tote Dispenser l Portable l Robotic

In Line Box filling Applications
In Line Box Filling can be configured to meet a wide range of application needs. Containers can be filled using a machine count, a weigh scale, a weigh scale hopper or a robot. A wide choice of options such as covered cooling chambers, under press hoppers, Lexan® covers, ionization and more, allow systems to be custom designed to provide maximum productivity.

Click on images for greater detail

This space saving, single station, Weigh Scale Box Filling systems signals visual and audible warnings when the box is 95% full, giving an operator time to prepare a new empty box. It could also be programed to signal when it is 100% full.
A basic, Weigh Scale system such as this can accurately fill parts into large containers, providing hours of unattended box filling.

Automated Tote dispenser systems are configured to meet individual application needs. This system can hold up to 20 wire reinforced, rimmed totes, and uses a cycle count to fill parts into the totes. If greater accuracy is desired, the same system could also be used with a Weigh Scale Hopper.
Over under box filling systems can be custom designed to maximize available floor space. This system allows 4 rows of boxes to be filled before an operator is needed.
© 2007 EMI Plastics Equipment. All rights reserved. Contact us at 800-543-6169 or Sales@EMIplastics.com