 |
|
|
|
|
|
 |
 |
 |
 |
 |
|
 |
|
||||
 |
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
|
|
|
Speciality Applications
EMI has been developing automation systems and products, specifically designed to meet the needs of the the plastics industry, since 1972. Below are a few ideas from the thousands of systems we have installed. For more information about how EMI can help you automate your specific system please contact us: |
Phone
- 800-543-6169. Email
- Sales@EMIplastics.com
|
Each
of these application ideas is located within this website. Click the image to take you there |
|
 Trunkline conveyors can be combined with incline conveyors, belt turns, bridge conveyors, multi-level storage systems, etc., to provide the perfect automation solution for almost any application. |
 Positioned under an extrusion blow molding machine, EMI's two level, Blow Molding, Conveyor-Separator separates bottles and scrap as they fall from the press. |
 Air pressure blows cut extrusions off this conveyor into a catch tray on the side. Adjustable air hoses allow nozzles to be easily moved to accomodate different length extrusions. |
 This cooling conveyor uses water sprayers to spray a fine mist of water onto hot extrusions as they pass underneath. Water drains off through a wire mesh belt, into a stainless steel pan below. |
 This bag filling system fills 36 bags at a time and can weigh to within 0.5 grams. The system fills almost continuously, stopping only long enough for the parts to drop into the bags. |
 This robotic Belt Turn application moves parts placed by a robot onto an elevator which moves them to a lower position. Parts maintain their original orientation on the belt throughout the entire application. |
 This 5 level Box-filling system maximizes unattended filling times by allowing 4 rows of boxes to be filled and stored before an operator is needed. |
|
 |
|
| © 2007 EMI Plastics Equipment. All rights reserved. | Contact us at 800-543-6169 or Sales@EMIplastics.com |