|
|
|
Filtroil Oil Purification System
Protect your hydraulic systems from damage due to dirty oil
|
The Filtroil Hydraulic Filtration System significantly reduces downtime from hydraulic component failure by consistently maintaining
oil quality 2 to 5 grades cleaner than new oil. Field studies have shown that using the Filtroil system consistently, reduces machine hydraulic
repairs by 25% to 35%!
|
How does it work?
The Filtroil system provides three levels of filtration. The upper stage removes only the largest particles, smaller particles are allowed to filter to the next
stage where most are removed. The smallest particles (to 0.1 micron) are removed at the lowest level. This separation allows the oil to flow slowly through the
system and prevents the filter from clogging. |
More Benefits |
- Reduces oil replacement and disposal costs
- Cools and cleans the oil system to ensure smoother machine operation
- Increases equipment availability and uptime
- Extends component and fluid life
- Provides significant economic payback
|
More Features |
- A push test drain valve lets you test your unfiltered oil straight from your high-pressure lines. This allows you to easily obtain a good diagnosis of
your current oil status, and replace the element if necessary
- The Filtroil hydraulic filtration system has no moving parts, and requires no electricity, motors or pumps
- A liquid-filled pressure gauge indicates if an element needs to be changed before the scheduled replacement time
- A shut-off valve allows you to change the element without shutting the machine down
- 400 yards of treated cellulose fiber provide a dirt holding capacity of over a pound of dirt and several ounces of water
- The Filtroil, fast acting, water eater element can be added to help remove excess water from your hydraulic system
|
Focus 800 - Portable, Electric, Oil Reclamation Unit (pictured - Focus 400)
Total Dirt-Holding Capacity = 5 lbs. - Total Water-Removal Capacity = up to 80 fl.oz.
- (4) BU-200 canisters for utilizing the Filtroil 200E and 200ME (water-removal) elements
- Provides filtering accuracy down to 0.1 micron achieving ISO codes of 16/14/11 or better
- Size: 30.3 (L) X 22.4 (W) X 19.7 (H) inches
- Weight: 310 lbs.
- Flow Rate: 4.2 gpm
- Power Supply: 110V / 220V (50 or 60 Hertz)
- Elements: 200 E (4)
- Time controller, temperature gauge, pressure gauge, vaccum gauge, operating lamp, on/off button
- Caster wheels and quick disconnects provide excellent mobility
- Pump protected by cleanable 100µm suction filter
|
|
