|
|
|
Hopper Magnets
Big 1" Diameter, Stainless Steel Magnetic Tubes
|
|
Round Hopper Magnets
|
|
Easily mounted over the throat of your injection molding machine hopper
or in your granulator’s catch bin, these reliable magnets
keep ferrous metal scrap from entering your injection barrel and
damaging screws, ring valves, dies and molds.
| Round
Hopper Magnets
|
| Quick
# |
Model |
Size
- dia. |
Price |
| M133
|
HMR04
|
4"
|
$120
|
| M134 |
HMR06 |
6" |
$139 |
| M135
|
HMR08
|
8"
|
$199 |
M136 |
HMR10 |
10" |
$243 |
M137 |
HMR12 |
12" |
$282 |
|
Rectangular & Square Hopper Magnets
|
|
The all stainless steel construction protects your material and the 45° diverters
make sure material must pass over the 1" diameter magnetic tubes
which are spaced only 1" apart. These hopper magnets are priced
so economically, you can put one in every machine hopper or granulator
bin in your plant.
| Square Hopper Magnets |
Quick# |
Model |
Size |
Price |
M138 |
HM0404 |
4"
x 4" |
$106 |
M139 |
HM0606 |
6"
x 6" |
$138 |
M140 |
HM0808 |
8"
x 8" |
$203 |
M141 |
HM1010 |
10"
x 10" |
$280 |
M142 |
HM1212 |
12"
x 12" |
$356 |
|
|
Sizing Suggestions:
1. Measure approximately 8" to 10 " above the discharge opening. When this size is determined, check the sizing chart. If the exact size magnet is not listed, go to the next
larger size which will be the standard. 2. If your measurement is between two standard sizes listed, order the larger size for maximum magnetic efficiency. |
|
