Belt Cleaner - BC-16
Bring belts back to near-new condition without scrubbing or rinsing. Powerful, water soluble, liquid solvent cleaner rapidly penetrates oil, grease, grime and stubborn stains. Spray on and wipe off. No oily residue or film. Non-flammable, non-acid, non-abrasive and contains no phosphates. So safe it can be used on PVC, nitrile, or metal belts. Hand pump included with every bottle.



 

NEW Mold Release Products
Call today for a FREE sample
Updated 05/07 Quantity Discounts Available
EMI now carries the full line of ZIP mold release agents, cleaners, and corrosion preventives. ZIP products help you improve molding efficiency in diverse applications including injection, compression, transfer, vacuum form, pour cast, die cast and extrusion.
Food Grade Paintable Mold Release
Paintable non-silicone formula gives multiple part releases per application.
Specially formulated as a paintable release agent and anti-stick lubricant for nylons and other molded materials such as plastics, rubber, waxes, and more.
Allows molded parts to be painted, plated, labeled, or bonded after molding.
The release agent in ZIP ME-514E meets FDA regulation 21 CFR 178.3570 for use of lubricants with incidental food contact.
Excellent release for virtually all resins. Especially good where parts will be cemented or painted with solvent based paints.
Part #
Quick #
Per Case (12 cans)
ME-514E
A514
$49.55
Food Grade Pure Silicone Mold Release
Food grade silicone formula gives multiple part releases per application.
Specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials.
Dry-mist coating reduces mold build-up.
Ideal for use in all phases of plastic processing requiring FDA acceptance.
The release agent in ZIP ME-175E meets FDA standards 21 CFR 175.300 and 21 CFR 178.3570 for use of lubricants with incidental food contact.
Stable to 600°F and will provide lasting lubrication under this temperature.
Part #
Quick #
Per Case (12)
ME-175E
A512
$50.36
Organo Paintable Mold Release
Best performing paintable release gives the most part releases in many applications.
Specially formulated as a paintable release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials.
Dry-mist coating reduces mold build-up.
Allows molded parts to be painted, plated, labeled, or bonded after molding in most applications.
Gives molded parts a satin finish.
Part #
Quick #
Per Case (12)
ME-263E
A515
$58.59
Zinc Stearate Mold Release
Heavy-duty release agent is formulated for difficult-to-remove molded parts.
Specially formulated as a paintable release agent and anti-stick lubricant for molded materials such as plastics, rubber, metals, and similar materials.
Is generally recognized as a paintable release agent.
Allows molded parts to be painted, plated, labeled, or bonded after molding in most applications.
Releases virtually all molded materials. Especially useful in rubber molding, wire drawing, and powdered metal casting.
Part #
Quick #
Per Case (12)
ME-369E
A517
$48.87
Pure Silicone Mold Release
Heavy-duty silicone formula gives multiple part releases per application.
Specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials.
Dry-mist coating reduces mold build-up.
Stable to 600°F and will provide lasting lubrication under this temperature.
The release agent meets FDA standards 21 CFR 175.300 and 21 CFR 178.3570 for use of lubricants with incidental food contact.
Heavy duty formula lasts longer than standard silicone products. Useful in the manufacturing and processing of rubber, leather, glass, and more.
Part #
Quick #
Per Case (12)
ME-100E
A511
$50.22
Polyurethane Mold Release
Formulated specifically to release molded polyurethane resins.
Improves molding efficiency when injection molding, pour casting, or otherwise molding polyurethanes.
Dry-mist coating reduces mold build-up.
Provides a clean, highly cosmetic release, reduces mold build-up, and permits more cycles between applications.
Can be removed with a detergent water solution if painting or plating is required.
Part #
Quick #
Per Case (12)
ME-515E
A513
$55.08
Non Silicone Paintable Mold Release
Heavy-duty synthetic, paintable formula gives multiple part releases per application.
Specially formulated as a paintable release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials.
Non-silicone synthetic, high temperature release agent and lubricant.
Allows molded parts to be painted, plated, labeled, or bonded after molding in most applications.
Stable to 400°F. Will not carbonize or form sludge or varnish. High film strength and good load qualities.
Part #
Quick #
Per Case (12)
ME-345E
A516
$49.55

EZ Pin Lube & Release
Paintable formula lubricates ejector pins and gives multiple part releases per application.
Improves molding efficiency in many processes including injection, compression, transfer, vacuum form, pour cast, die cast, and extrusion.
Specially formulated as a lubricant for knock-out pins in the forward position.
Stable to 400°F and will provide lasting lubrication under this temperature.
High film strength and high temperature range give long lasting performance.
Non-silicone formula allows molded parts to be painted, plated, labeled or bonded after molding in most applications.
Part #
Quick #
Per Case (12)
ME-2345E
A540
$48.87

 

Click here for page 2

© 2007 EMI Plastics Equipment. All rights reserved. Contact us at 800-543-6169 or Sales@EMIplastics.com